Regional Training Program - Atlanta, GA
View Registrations Tell a Friend About This EventTell a Friend
Regional Training Program - Atlanta, GA

5/15/2018
When: Tuesday, May 15, 2018
7:30 AM
Where: Daltile
1441 Ellsworth Industrial Blvd.
Atlanta, Georgia  30318
United States
Presenter: Mark Heinlein
Contact: Mark Heinlein
906-361-8821


Online registration is closed.
« Go to Upcoming Event List  

Tuesday, 
May 15, 2018
Daltile--Atlanta, GA

Only 20 spots available! 
Register Now!

$50.00 Refundable deposit

All no shows/cancellations forfeit a refund

  Curriculum/Course Description:
Gauged Porcelain Tile/Panels


Standards based installation of Gauged Porcelain Tile and Gauged Porcelain Panels/Slabs 
Attendees will learn the tile industry standards with a focus on the new standards and methods for installing Gauged Porcelain Tile and Panels. Learn how it is made, where it can be used for and the special tools, setting materials and techniques required to install it. 

These items will be covered: 
*Introduction to tile industry standards 
*Use of ANSI A108.19 to install Gauged Porcelain Tile and Panels 
*Use of specialty tools and setting materials to install GPTP 
*Working with a team to install GPTP   
   

Agenda:

7:30 - 8:00 Arrive at training location
• Sign in

8:00 Welcome and introductions
• Overview of seminar and agenda

8:10 Introduction to Tile Industry Methods and Standards (NTCA)
• ANSI A108 / A118 - American National Standards Specifications
for the Installation of Ceramic Tile – Material and Installation
Standards
• ANSI A137.1 / 137.2 – Specifications for Ceramic and Glass tiles
• TCNA Handbook for Ceramic, Glass and Stone Tile Installation

8:30 Introduction to Gauged Porcelain Tile and Panels (Manufacturer)

8:50 Overview of ANSI A108.19 and ANSI A137.3 (NTCA)
• American National Standard Specifications for Gauged Porcelain
Tiles and Gauged Porcelain Tile Panels / Slabs – Material and
Installation Standards

9:20 Setting Materials for GPTP – Selection and Use (Manufacturer)

9:30 Break

9:45 Safety Briefing

10:00 Hands on Demonstration: Substrate Prep for Floors and Walls
(NTCA / Manufacturer)
• Inspect horizontal and vertical substrates for flatness
• Discuss proper substrate preparation, materials and techniques

10:15 Introduction to Specialized Tools and Material Handling (NTCA /
Manufacturer)
• Proper tool usage and material handling
NTCA Regional Training Program - GPTP - Updated 12/26/17 4

11:00 Grout Joints, Expansion Joints and Lippage Tuning
Systems/Devices (NTCA / Manufacturer)

11:10 Break into teams

11:15 Installation of GPTP on Floors
• First team installs GPTP on floor

12:00 Lunch

12:45 Review / Q&A

1:00 Installation of GPTP on Floors (Continued)
• Second team installs GPTP on floor
• Third team installs GPTP on floor

2:00 Installation of GPTP on Walls
• Fourth team installs GPTP on wall
• Fifth team installs GPTP on wall

3:00 Break

3:15 Work with tools to handle, cut, drill, measure, template

4:30 Review and Q&A

5:00 Certificates of Completion
Instructor led installation will cover these main points:
• Measure, cut and handle tile/panels
• Trowel selection and troweling techniques
• Timing
• Teamwork
• Bedding / Coverage
• Lippage tuning systems
• Control / Expansion / Perimeter joints
• Grouting / Sealant
• Wall installation
• Floor installation
• Cutting
• Drilling